Star-trac E-TBTe Bedienungsanleitung PDF herunterladen (Seite 5)

620-7921 Rev A

Step 1.

Route display cables up through upper half of

neck through the holes provided.

Step 2.

Insert the upper half of the neck into the lower

half.

Caution: Be careful not to pinch any cables between

the two sections of the assembled neck.

Step 3.

Install two 5/16” - 18 X 3/4” button head screws

into front neck using a 3/16” hex key. Tighten

bolts to 200 in-lbs (23 N-m).

Step 4.

Secure the neck by tightening the 3/8-16 x 2”

socket head cap screw using a 5/16” hex key.

Tighten bolt to 300 in-lbs (34 N-m).

INSTALLATION INSTRUCTIONS

1 2 3 4 5 6 7 8 9 10 ... 52 53

Keine Kommentare

Star-trac E-TBTe Bedienungsanleitung Seite 5